6
Application Field
Device status
The following applications are described for devices with status "factory settings". This is
mandatory because parameters not changed during sample setup may have influence to
the devices' behavior!
Live test requirement
If you want to use the same setup as described with the sample, please ensure factory
settings status of the device before changing it.
Otherwise you have to take care that the changes you did before do not "disturb" sample
settings!
Application Modes
For application modes overview see chapter
╚═▷ “2.2 Application Modes Overview”
.
6.1
Basic Applications
6.1.1
Application mode A01 (None)
This application mode (
A01
) may be used, where the breaker control is done external. In
this case, the easYgen will function as an engine control with generator and engine
protection. The control does not operate any breaker. Emergency mode (AMF operation) is
not supported in this application mode.
680
easYgen-3000XT Series
B37574
6 Application Field
Released