Woodward easYgen-3000XT Series, Manual, Page: 668 / 1205

ID Parameter CL Setting range
[Default]
Description
maintenance, a maintenance
message is displayed.
If this value is changed, the
counter is reset to the new value.
If the maintenance counter is
reset by the push-buttons at the
front panel (refer to
╚═▷ “2.1
Display And Status Indicators” ), or
by configuring the parameter
"Reset maintenance period days"
to "Yes" (parameter
╚═▷ 2563 ),
the maintenance counter is reset
to the configured value.
Notes
To disable the "maintenance days"
counter configure "0" for this
entry.
2563 Reset maintenance
period days 2 Yes / No
[No]
If this parameter is configured to
"Yes" the "maintenance days"
counter is reset to the configured
value. Once the counter has been
reset, the control unit changes
this parameter to "No".
Notes
When using a specific code level
in parameter
╚═▷ 2567 to reset
maintenance days this parameter
can be blocked.
Notes
- menu path:
[Next Page / Configure counters /
(symbol: wrench)]
2567 Code level for reset
maint. 2 This parameter determines the
required code level for resetting
the counter "Maintenance call
in...". User with a lower code level
may not access this function.
The following code levels exist:
0 Operator
1 Service level
[2] Temporary commissioner
3 Commissioner
Notes
The code level defined here only
affects the access via the front
panel (HMI).
668 easYgen-3000XT Series B37574
4 Configuration
4.10.2 Service Reset Values
Released