Start/Stop logic (inhibit cranking)
Fig. 151:
Engine - start/stop logic (inhibit cranking)
ID
Parameter
CL
Setting range
[Default]
Description
3302
Start attempts
2
1 to 20
[3]
The control will attempt to start
the engine with this number of
start attempts.
If the engine fails to start after the
configured number of attempts,
an alarm will be initiated.
An engine has been successfully
started if the ignition speed
reaches the configured firing
speed and the delayed engine
monitoring (set by release engine
monitoring) has expired.
4102
Start attempts
critical mode
2
1 to 20
[10]
If a critical operation mode (
) is
initiated, the engine will continue
to attempt to start for the number
of starts configured here.
An engine has been successfully
started if the ignition speed
reaches the configured firing
speed and the delayed engine
monitoring (set by release engine
monitoring) has expired.
218
easYgen-3000XT Series
B37574
4 Configuration
4.4.1.2 Engine Start/Stop
Released