-21-
Model W1815 (Mfg. Since 10/10)
M
A
INTE
N
A
N
CE
MAINTENANCE
Lubrication
This machine uses permanently lubricated ball bearings.
No bearing maintenance is required.
Cleaning the Model W1815 is easy. Vacuum excess wood
chips and sawdust off of the table and motor, and wipe
off the remaining dust with a dry cloth. If any resin has
built up, use a resin dissolving cleaner to remove it. Treat
all unpainted cast iron surfaces on the table with a non-
staining lubricant after cleaning, and after ever use.
Cleaning
For optimum performance from your machine, follow this
maintenance schedule and refer to any specific instructions
given in this section.
Check for the following conditions and repair or
replace when necessary:
Daily Check:
• Loose mounting bolts.
•
Worn, loose, or damaged sanding disc.
•
Worn or damaged power cord.
•
Any other condition that could hamper the safe
operation of this machine.
Weekly Maintenance:
• Wipe off the sawdust build-up from the table
surface.
• Vacuum out dust from the motor fan area and from
around the base of the machine.
Long-Term Storage:
• Keep unpainted surfaces rust free with heavy-duty
rust prevention compound.
Schedule
MAKE SURE that your machine is
unplugged during all maintenance pro-
cedures! If this warning is ignored, seri-
ous personal injury may occur.
Summary of Contents for SHOP FOX W1815
Page 33: ...Model W1815 Mfg Since 10 10...
