background image

Page 4

Due to continuous product research and development,
the information contained herein is subject to change without notice.

www.stoddart.com.au
www.stoddart.co.nz

Introduction

Carefully read this instruction booklet, as it contains important advice for safe installation, operation and maintenance. 

Keep this booklet on hand in a safe place for future reference by other operators or users.

Stoddart design, manufacture & distribute Food Service Equipment (appliances) exclusively for the commercial market.

This appliance is not designed nor intended for household or domestic use & must not be used for this purpose.

This product is intended for commercial use, and in line with Australian electrical safety standards the following warnings are provided:

•  This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of 

experience and knowledge, unless they have been given supervision or instruction concerning the use of the product by a person 
responsible for their safety.  Children should be supervised to ensure that they do not play with the product

•  If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualifi ed persons in order to avoid 

a hazard

The manufacturer and distributor cannot be held responsible or liable for any injuries or damages of any kind occurred to persons, 

units or others, due to abuse and misuse of this unit in regards to installation, removal, operation, servicing or maintenance, or lack of 

conformity with the instructions indicated in this documentation.

Disclaimer

All units made by the manufacturer are delivered assembled, where possible, and ready to install.  Any installation, removal, servicing, 

maintenance and access or removal of any parts, panels or safety barriers that is not permitted, does not comply in accordance to this 

documentation, or not performed by a 

TRAINED AND AUTHORISED SPECIALIST

 will result in the

IMMEDIATE LOSS OF THE WARRANTY.

The manufacturer cannot be held responsible or liable for any unauthorized modifi cations or repairs.  All modifi cations or repairs must 

be approved by the manufacturer in writing before initiating.  All modifi cations or repairs performed to this unit must be performed at all 

times by a 

TRAINED AND AUTHORISED SPECIALIST.

Thank you for choosing this quality Woodson product.
All Woodson products are designed and manufactured to meet the needs of food service professionals.  By caring for and maintaining your 
new Woodson product in accordance with these instructions, will provide many years of reliable service.

Stoddart is a wholly Australian owned company, which manufactures and/or distributes a comprehensive range of food service equipment for
kitchens, food preparation and presentation.  Stoddart products are manufactured and/or engineered in Australia to provide excellent results 
whilst offering value-for-money, ease-of-use and reliability.

•  All units MUST be installed according to the procedures stated in the installation section of this manual
•  In the case of new personnel, training is to be provided before operating the equipment
•  DO NOT use this unit for any other purpose than its intended use
•  DO NOT store explosive substances such as aerosol cans with a fl ammable propellant in or near this unit
•  Keep fi ngers out of “pinch point” areas
•  Unit is not waterproof DO NOT use jet sprays, hoses or pour water over/on the exterior of the unit
•  Only use this unit with voltage specifi ed on the rating label
•  Do NOT remove any cover panels that may be on the unit
•  DO NOT use sharp objects to activate controls
•  DO NOT use sharp objects to remove ice from the unit
•  If any fault is detected, refer to troubleshooting
•  The manufacturer declines any liability for damages to persons and/or things due to an improper/wrong and/or unreasonable use of the 

machine

•  Only specifi cally trained/qualifi ed Technicians (Stoddart, one of our service agents, or a similarly qualifi ed persons) should carry out any 

and all repairs, maintenance and services

When using any electrical unit, safety precautions must always be observed.
Our units have been designed for high performance.  Therefore, the unit must be used exclusively for the purpose for which it has been designed.

General Precautions

Warranty Registration

Warranty Period

Australia and New Zealand Warranty

To register your new product, go to the Stoddart warranty page: 

http://www.stoddart.com.au/warranty-registration

Stoddart 12 month on-site parts and labour warranty (terms and conditions apply), from the time of purchase.
To view or download the warranty terms and conditions visit: 

http://www.stoddart.com.au/warranty-information

 

Warranty & Registration

Summary of Contents for W.CVT.D.10

















Reviews: