Step 1: Verify package contents
Step 2: Assemble poles
1) Assemble the tent poles by placing
fibreglass sections into the metal ferrules.
Four poles are provided:
2 each (A) Main poles (Green)
1 each (C) Fly pole (Gray)
1 each (B) Roof pole (Green)
IMPORTANT NOTES:
* Assemble your tent before camping to become
familiar with the assembly.
* Two people are recommended for setup.
* Select a clean, level area for the campsite, free
of debris and sharp objects, away from any
natural watercourse.
* Use of a ground cloth is recommended to
prolong the life of the tent floor and provide
additional insulation and moisture protection.
* To prevent damage to the zippers, unzip the
doors and windows of the tent prior to
disassembly, allowing air to move freely.
* Seam-seal the inside stitched seams of the tent.
This will improve weather resistance. Available
in sporting goods departments. Discolouration
may occur if applied to outside seams.
Step 3: Spread out tent, insert poles
1) Spread out the tent flat, floor side down.
2) Position poles (A) so they cross at the centre
of the tent. Make certain the centre of the
poles meet at the centre of the tent and
loosely fasten the fabric ties.
3) Place the roof pole (B) at the middle on the
main poles. Place the pole ends into the
pole buckets located on both side of the
tent.
Step 4: Secure main poles
1) With a person holding each end of a main pole (A), flex the pole into an arch. Carefully
place the ends into the fast feet located at the stake loops.
2) Repeat this step for the remaining main tent pole (A).
Step 5:
Fasten hooks
1) Clip the plastic hooks on the tent to the
fibreglass pole frame.
CTC160907-2(076-6067-6)
ASSEMBLY INSTRUCTIONS
A
A
A
A
CTC160907-2 10/15
Mud mat : 1 each
Tent : 1 each
Tent Stakes : 11 each
Rainfly : 1 each
Fibreglass Poles : 4 each (total)
( ) denotes colour coding
(A) Main pole (Green) - 2 each
(B) Roof (Green) - 1 each
(C) Fly (Gray) - 1 each
B
Gear Loft w/TP :
1 each
