14 Service
MCPBH-B (Rev. 4/20/2007)
Figure 11.
4. Turn the drum over as shown in Figure 12. Install
the planetary / motor assembly (8).
5. Install nine 9/16" –18 nuts (6) and nine 9/16" flat
washers (7).
6. Torque nuts to 118 lbs-ft. (160 N-m).
Figure 12.
7. Raise the planer to allow clearance to slide the
drum assembly under the planer as shown in
Figure 13.
8. Lower the planer.
Figure 13.
9. Apply a thin coat of anti-seize grease to a portion of
deadshaft (9) that is inserted into the bearing as
shown in Figure 14.
Figure 14.
10. Insert the deadshaft through the chassis side plate
and into the drum bearing as shown in Figure 15.
11. Install three 5/8" –11 bolts (10), five 5/8" flat
washers (11), and two 5/8" –11 lock nuts (12)
through deadshaft. Do not tighten.
NOTE: The top deadshaft bolt has a weld nut on
the inside of the chassis and does not require a
washer or nut on the inside of the chassis.
