Atmospheric 4 Tent
076-3237-0
ASSEMBLY INSTRUCTIONS
IMPORTANT NOTES:
•
Assemble your tent before camping to become familiar with the
assembly.
•
One person required for setup - two preferred.
•
Select a clean, level area for the campsites, free of deb
ris and sharp
objects, away from any natural watercourse
.
•
U
se of a ground cloth is recommended t
o prolong the life of the tent
•
To prevent damage to the zippers, unzip the doors and windows of
the tent prior to disassembly, allowing air to move freely.
•
Seam-seal the inside stitched seams of the tent. This will improve
weather resistance. Available in sporting goods departments.
Discolouration may occur if applied to outside seams.
Ten
t: 1 each, with (A) twin valve Integrated Airbeams
Steel Stakes: 20 each
1)
Stake the corners down by inserting a stake through the stake loops,
locate at each corners.
2)
3)
Hammer the stakes into the ground at a 45° angle using a hammer or
mallet.
Step 2: Peg out the corners
Step 4: Secure the tent
Step 1: Verify package contents
1)
Secure tent using all guy lines and stakes. Tent must be secured for proper function.
Close the front door and get proper alignment using your guy lines.
2)
DO NOT INFLATE
ABOVE 9 PSI.
The pressure release valve will
engage once 9 PSI is achieved.
Pressure gauge
Hose
Pressure release valve
1) Open the front door.
3) Insert the pump adaptor which will lock into the valve.
5) Final air tube pressure should not exceed 9 PSI. DO NOT OVER INFLATE THE BEAMS!
6) Remove the pump adaptor as soon as the air beam is at the correct PSI.
8) Peg out the remaining guy lines. Ensure that the guy lines are equally tensioned for stability.
Open Closed
