Rev 1.1/1-20
P1-02DC3: #35122
23
Storing the Lifter
1)
1B
Use the covers supplied to keep the vacuum pads clean
(fig. 1B).
!!-CE-!!
To prevent the lifter from tipping over on relatively
horizontal surfaces, place the vacuum pads facedown on a
clean, smooth, flat surface. Then lower the lift bar and place a
support under the lift point.
2) Charge the battery completely and repeat every 6 months (see “12-V
3A
3B
3)
3C
3D
3E
Disconnect the electrical connectors (figs. 3A-B
and figs. 3C-E) to prevent battery discharge.
4) Store the lifter in a clean, dry location.
Store the battery between 32° and 70° F [0°
‒
21°
C]. Avoid storage above 100° F [38° C].
OPERATION
Summary of Contents for P110C02DC3
