Product
Description
Designed for use with hoisting equipment, P1-04DC3 lifters support loads using vacuum and manipulate
loads using 180° rotation and manual 90° tilt motions.
Model Number
P110C04DC3
P110T04DC3
P11104DC3
Vacuum Pads
1
1...... Available with other rubber compounds for special purposes (see
).
(4 each, standard rubber)
10" [25 cm] nom. diameter,
concave (Model G0750)
10" [25 cm] nom. diameter,
with replaceable ring
2
2...... Standard with replaceable sealing ring for rough or textured surfaces (see
).
(Model
VPFS10T)
11" [28 cm] nom. diameter,
lipped (Model G3370)
Pad Spread
(to outer edges)
49" x 10"
[125 cm x 25 cm]
50¾" x 11¾"
[129 cm x 30 cm]
51" x 12"
[130 cm x 30 cm]
Maximum Load
Capacity
3
3...... The Maximum Load Capacity is rated at a vacuum of 16" Hg [-54 kPa] on clean, smooth, nonporous flat surfaces with a friction coefficient of 1. Pad
compound, load rigidity, strength, surface conditions, overhang, angle, center of gravity and temperature can also affect the lifting capacity. A “qualified
person” should evaluate the effective lifting capacity for each use (see definition under
Per pad: 150 lbs [68 kg]
Total: 600 lbs [270 kg]
Per pad: 150 lbs [68 kg]
Total: 600 lbs [270 kg]
Per pad: 175 lbs [80 kg]
Total: 700 lbs [320 kg]
Lifter
Weight
95 lbs [44 kg]
Power System
12 volts DC, 5.5 amps
Battery Capacity
7 amp-hours
Rotation
Capability
Manual, 180°, with latching at each ¼ turn (when required)
Tilt
Capability
Manual, 90°, with automatic latching in vertical position
Product
Options
Available
with Remote Control System – FCC, CE and ICC certified.
Operating
Elevation
Up to 6,000' [1,828 m]
Operating
Temperature
32° — 104° F [0° to 40° C]
Service Life
20,000 lifting cycles, when used and maintained as intended
4
4...... Vacuum pads, filter elements and other wear-out items are excluded.
Software Version
Intelli-Grip
®
7.6
ASME Standard
BTH-1
Design Category "B", Service Class "0"
Troubleshooting Guide
5
5...... To view this guide, click the link at right. Additionally, you can search for your lifter's Model Number at www.wpg.com and select the “Troubleshooting” link
on the product page.
Rev 5.2/12-21
P1-DC3: #35123
3
SPECIFICATIONS
