BA_WP_ADH5-410_EN_22-22.docx
20
5
Machine Data
5.1
Technical Specifications
Planing width (planer/jointer): max. 410 mm
Planing width (thicknesser): max. 406 mm
Passage height: min. 4 mm / max. 225 mm
Table height: 850 mm
Table length (planer/jointer): 1800 mm
Table length (thicknesser): 700 mm
Chip removal (thicknesser): max. 5 mm
Chip removal (planer/jointer):
max. 4 mm
Planer/jointer fence (L x W):
1100 x 155 mm
Fence tilt range:
90° … 45°
Cutter block speed:
4600
rpm
Cutter block diameter: 100 mm
Motor power: 5.5 kW / 7.5 HP
Motor voltage: 400 V / 50 Hz
Feed rate:
8 m/min.
Protection class: IP54
Dimensions: see
Space requirement: see section
Net weight: approx. 450 kg
Suction nozzle: Ø 120 mm
HOKUBEMA Maschinenbau GmbH
Graf-Stauffenberg-Kaserne
Binger Str. 28 | Halle 120
DE-72488 Sigmaringen (Germany)
Tel.: +49 (0) 7571 / 755-0
Fax: +49 (0) 7571 / 755-2 22
Figure 4: Name plate
5.2
Correspondence in the Case of Service
Please, in case of technical problems, contact your dealer or the manufacturer's service department. In corre-
spondence or during a telephone call regarding the purchased machine, you should have the following data at
hand:
•
Manufacturer number of the machine
•
Voltage and frequency
•
Date of manufacture
•
Detailed description of the fault
•
Detailed description of the type of machining carried out
•
General operating time of the machine in working hours
•
In case of questions regarding the electrical system, the information on the machine's type plate is al-
so required.
