Parts List
Outrigger Assembly, Front
Parts List
SBS97doc091818
3-15
3
4
Spring, Outrigger Pin
016145
1
5
Washer, 3/4" SAE Flat
F05011-62
1
2
Pin Assembly, Outrigger Pull w/Lock
007736
2
1
6
Pin, 3/4” Outrigger Pull
016147
1
7
Pin, 5/16" X 2 1/2" Roll
F05012-47
1
8
Plate, Outrigger Pin Lock
064001
1
9
Pin, 3/16" X 1 1/2" Roll
F05012-17
3
1
Pin, 1/8” x 1 1/4” Cotter
F05012-59
1
10
BOLT, 3/8-16 X 5” CARRIAGE HEAD
F05007-113
4/8
11
WASHER, 3/8” SAE FLAT
F05011-3
4/8
12
NUT, 3/8-16 HEX NYLON LOCK
F05010-10
4/8
1
Washers removed to improve outrigger locking pin operation (LT30HD/40HD Rev. H6.01, LT30HD/40HD Super Rev. H6.01). Wash-
ers may be removed on previous revisions with 3/4” diameter locking pins to improve operation.
2
Pin Assembly 007736 with Lock Plate 064001 replaces Pin Kit 016148 on Front and Rear outrigger assemblies to prevent pin from
vibrating loose (12/09).
3
Replaced F05012-103 3/16" X 1 3/4" Roll Pin (1/12). Use 05012-17 3/16" X 1 1/2" Roll Pin for LT30HD/40HD H6.02, LT30HD/40HD
Super H6.02 and later revision mills. Use F05012-59 1/8” x 1 1/4” Cotter Pin for all prior revision mills.
