STEP 1
STEP 7
STEP 2
STEP 6
PICOLLO EURO
IMPORTANT!! INSERT THE M8 STUD WITH DOME NUT
BEFORE LIFTING BOOM OUT OF BOX, AND FASTEN NUTS BEFORE
ROTATING ELBOW. ENSURE THAT M8 WASHERS ARE ON EACH SIDE.
NOW THAT M8 STUD IS IN PLACE ROTATE ELBOW 90 .
LIFT WOOD MAST INSERT OUT OF BOX AND MOVE
TO STEP 7.
SLIDE THE WOOD MAST INSERT INTO
THE BASE SLEEVE.
O
A
B
7
8
2 / 9
REFERENCE ILLUSTRATION
2
2
4
5
9
1
1
3
6
7
8
STEP 3
3
INSERT TENSION HANDLE
AND SECURE BY TURNING
CLOCKWISE.
STEP 4
INSERT SCREW WITH
PULLEY AT ANGLE.
SCREW IN 3-4 TURNS,
THEN FORCE PULLEY
DOWN INTO PLACE AND
TIGHTEN SCREW USING
ALLEN KEY.
4
5
STEP 5
6
SLIDE TILT HANDLE
INTO PLACE.
STEP 8
SECURE THE BASE SLEEVE TO THE WOOD
MAST INSERT WITH THE M6 BOLT
AND HARDWARE.
Distributor: Shadescapes Americas TEL: 970.527.7070 www.shadescapesamericas.com [email protected] © PROTRADE & WOODLINE cc. 2000