3 Repairs
Copyright © WOODLEY EQUIPMENT COMPANY LTD.
78
Figure 3-9 Replacement of sample probe (1)
1 - Cleaning swab
2 - Swab circle
2. Use a #2 (Ph2) Phillips screwdriver to take out the two M3×6 small cross recessed pan head
combination screws on the fixed pressure plate of the sample probe, and then take off the fixed
pressure plate. See Figure 3-10.
Figure 3-10 Replacement of sample probe (2)
1 - Sample probe
2 - Pressure plate affixing the
sample probe
3 - M3×8 cross-recessed pan-head
combination screw (×2)
