BULB & CAPILLARY CONTROLLER
Turn temperature control knob to desired temperature.
HOW TO OPERATE YOUR DIGITAL
CONTROLLER
1.)
TURN THE MAIN SMOKEHOUSE TOGGLE SWITCH TO
THE “ON” POSITION.
2.)
PRESS THE SET BUTTON ONCE AND “SP” WILL APPEAR
ON THE DISPLAY.
3.)
PRESS THE SET BUTTON AGAIN AND THE VALUE ON
THE DISPLAY CAN NOW BE CHANGED WITH THE UP
AND DOWN ARROWS.
4.)
ONCE THE CONTROLLER IS SET TO DESIRED
TEMPERATURE PRESS THE SET BUTTON TO ENTER
THE NEW VALUE.
5.)
PRESS SET AND DOWN AT THE SAME TIME TO EXIT
PROGRAMMING OR WAIT ONE MINUTE AND THE
DISPLAY WILL AUTOMATICALLY EXIT PROGRAM
MODE.
While the smoker is heating up, the actual smoker temperature is
displayed. Your controller comes pre-programmed with an operating
temperature of 60-250˚ F.
In case of an alarm error, the following messages can be shown:
-- = short circuit probe error
Er
= memory error
Oo
= open probe error
3
Summary of Contents for PK 100 Smoker 'N Roaster
Page 4: ...BURNER DRIP PAN INSTALLED Figure 2 ...
Page 13: ...CLEANING RECORD DATE STICKS SCREENS DRIP PAN INSIDE SMOKER BY WHO 7 ...
Page 16: ...10 ...
Page 46: ......