W1
W19
Z31
W20
2. Wooden parts, if necessary, can be treated with natural
wax or oil
before the assembly of the bed.
Advice:
We advise you not to treat the bed to sustain better environment for children (regulating humidity in the air). In addition it saves wax and oil costs and
offers advantage that it is easier to clean with tissues and cloth. Two further benefits: Untreated wood is easier for children to take a grip on handles and the
natural colour of the wood stays longer.
3. For the assembly of the bed you need the following
tools
: a ratchet with a size ten socket, a cross-end screwdriver (better yet a
cordless
screwdriver
with a changeable head and
size ten ratchet attachment
) and a
hammer
. Assistance is only necessary
when assembling the corner beams of the bed.
1. Please take a moment to see how everything fits together by using the diagram above. All the important building parts have
labers
to help you see how they fit into the overview. Please note that there is a separate
beam list
as an additional assembly aid.
All beams are shown horizontally or vertically as they should be positioned and assembled together. The
labels
on the packages
Lets begin:
Assembly Instructions MEMPHIS Post. 506
B1-B16
Z30
Z30
Z32
Z32
Z31
Z31
W13
W2
W14
W1
F2
F3
F1
W19
W20
W9
W8
Not all specifications are guaranteed.
© Copyrights by WOODLAND 1998
1.
1.
Z30
Z30
Z31
Z31
W14
W1
W19
W8
2.
2.
W1
Z31
Z31
Z32
Z32
Z30
Z30
W8
W19
W2
W14
W20
W9
W13
110mm flathead bolt
Start the assembly of the bed with the horizontal beams
W1, W8, W14 and W19
(W = horizontal, S =
vertical).
CAUTION! All horizontal beams (W1, W2, W8, W9) are built in a way that the side with most
round indentations (= ), face inside and the surface with two round indentations face
underneath!
The labels as shown ´in , can be found on the end of each beam. Position the beams
on the floor so that you can still walk around the bed while it is in the building phase .
The surface of beam W13 with round indentations should face the inner side.
During the beam assembly install the
flathead bolts
from
outside to inside
. From the inside screw a
size 6 flange nut using a screwdriver with size 10 attachment. But do not over tighten bolts.
diagram1.1
diagram1.1
1.
1.
16mm 35mm
screws
110 mm
flathead bolt
flange nut
M6
R
flange
nut M6
