PINECAR
®
Manufactured by
Woodland ScenicS
®
PO Box 98, Linn Creek, MO 65052 • pinecar.com
SAND CAR BODy (Fig. 10)
1. Sand car with #80 grit sandpaper to smooth
finish. Wipe car to remove dust.
NOTE:
Balsa Wood parts sand more easily
than the pine.
2. Create fine details with sandpaper
(Fig. 10a)
.
APPLy SANDING SEALER (Fig. 11)
1. Apply sanding sealer and sand car (per
package instructions).
TIP!
Try PineCar Sanding Sealer and Wax
(P3960) for a flawless finish and PineCar
Body Putty (P3928) to fill in gaps or repair
deep scratches.
PAINT CAR (Fig. 12)
1. Apply at least two coats of paint, sanding
lightly between coats. Apply a final light coat
of paint, but do not sand.
PREPARE AxLES AND WhEELS
(Fig. 13)
1. To minimize axle friction and increase car
speed, polish axles and tune wheels before
attaching to car. For exceptional results,
use the PineCar Micro-Polishing System™
(P4038) and Wheel Turning Mandrel (P357).
One-Piece Axles:
Pre-fit axles in grooves.
Remove, then polish.
Nail-Type Axles:
Remove burrs from axles, then polish.
Wheels:
Using a mandrel and fine grade sandpaper, remove mold
imperfections and sand smooth.
ATTACh WEIGhTS (Fig. 14)
1. Weigh car and all components before attaching weights. Add or deduct
weight per official race rules. It is best to make your car the maximum
weight allowed.
ATTACh WhEELS (Fig. 15)
1. Install wheels and axles. Be sure axles set flush with bottom of car.
LUBRICATE WhEELS AND AxLES (Fig. 16)
1. Apply graphite between wheel
and axle. Spin wheel to distribute
graphite. Try PineCar Hob-E-
Lube Dry Graphite (P358) or
XLR8 Ultra Graphite (P4037).
BODY BUILDER KIT - P4036
continued
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 15
Fig. 11
Fig. 13
Fig. 16
Fig. 10
Fig. 10a
Fig. 12
Fig. 14
