WG24 Operator’s Manual
CHAINSAW HOLDER
Use the chainsaw holder only during transport. Always remove the chainsaw from the holder
prior to grinding stumps.
STORAGE
1. Lower both support legs and reinsert the locking pins.
2. Insert the stabilizer pin in either the left or right side of machine. It does not matter which
side is selected.
3. Lower the stump grinder onto a flat, level surface.
4. Disconnect the PTO shaft.
5. Remove the stump grinder from the tractor’s 3-point hitch system.
WG24-MY2019: Rev A
Page
of
21
28
22-Oct-2018
Summary of Contents for WG24
