Multilander
™
Operator’s Manual
5. HINGE PLATES
Using the hardware listed below, assemble the hinge plates to the bottom of the side walls.
Torque all four (4) bolts per the table in section,
Assemble a pair of hinge plates to the bracing on the bottom side of each wall. Use two (2) M10
X 80 mm bolts and lock nuts. Fully tighten these bolts. Note hinge plate profile orientation (see
below-right
)
4x
M10 X 80 mm
Flanged Hex
Bolt
4x
Hinge Plate
4x
M10 Flanged
Lock Nut
MLTRUB-MY2020: Rev A
Page
of
14
32
21-Aug-2019
FRONT
REAR
NOTE HINGE PLATE PROFILE—
STEEPER ANGLE FACES REAR
OF UTILITY BOX
Steeper
Angle
Summary of Contents for Multilander Logging Trailer with Utility Box
