Bushlander
™
Operator’s Manual
7. END BUNKS
Using the following hardware, install the end bunks as shown. Ensure that the support legs are
inserted into the leg holder portion of the end bunk prior to attaching the end bunk to the track
rails.
Ensure that the track is 26 in [660 mm] wide, measure diagonally to check for squareness.
Torque all bolts from steps 5 to 7 per the table in section,
8x
M10 X 25 mm
Flanged Hex
Bolt
2x
End Bunk
8x
M10 Flanged
Lock Nut
4x
Support Leg
BHLR-MY2020-EN: Rev B
Page
of
14
56
20-Aug-2020
Support Leg
**If a trailer
extension was
purchased, do not
install this end bunk.
See next page.**
Summary of Contents for BUSHLANDER
