woodize.com
Clock operation / control buttons
Start the clock
Connect the power adaptor and the clock cable and plug the adap-
tor to your wall socket. On the tubes you will see 6-5 4-3 2-1 count-
ing numbers. Press and hold the SET button for two beeps and the
clock will start. See next chapter how to set the date and time!
If your clock is showing the 6-5 4-3 2-1 numbers it means the clock
is in stand by mode. For exaple the clock was disconnected from
the power source for long hours. Pressing the SET button for 2
beeps will start the clock again and the date and time need to be
set.
GPS indicator light
Alarm light
SET
ADJUST
ALARM
Set the date and the time
Press and hold the SET button for 2 beeps to enter date and time
setup!
Highlight the values what you wish to set by pressing the SET
button once!
Change the values by pressing the ADJUST button!
Press and hold the SET button for 2 beeps to exit the setup!
The clock does not have Daylight Saving time options! The time-
zone offset need to be adjusted manually twice a year in DST zone
countries.
