CAUTION! BEFORE CLEANING OR CARRYING OUT MAINTENANCE WORK, DISCONNECT THE
LATHE FROM THE POWER SOURCE (WALL SOCKET). NEVER USE WATER OR WATER BASED
PRODUCTS TO CLEAN THE LATHE STAND.
Periodically check all of the stand bolts and tighen when necessary.
Make sure that the lathe stand is level.
Remove all saw dust and chips from the lathe stand after each use.
6
Fig.10
5.) Repeat the steps in “Connecting and Adjusting
the Extension Supports” located on page 4.
6.) Repeat the steps in “Determining Proper Lathe
Height” also on page 4.
7.) Next, adjust for lathe bed distance, following
the instructions in “Adjusting for Lathe Length”
located on page 5.
8.) Mount the lathe extension to the stand by using
the hardware provided. (Fig. 10)
9.) Level the Extension Stand by following the
instructions found on page 5.
Maintenance
