1. GENERAL INFORMATION
1.1
FOREWORD
This machine is professional f
or
straight cutting and square cutting of wood material, especially for wood panels cutting.
Some information and illustrations in this manual may differ from the machine in your possession, since all the
configurations inherent in the machine complete with all the optional are described and illustrated. Therefore, refer only
to that information strictly connected with the machine configuration you have purchased.
With this manual we would like to provide the necessary information for maintenance and proper use of the machine.
The distribution network is at your service for any technical problem, spare parts or any new requirement you many
have for the development of your activity.
This manual must be read and understood before operating the machine. This will provide a better
working knowledge of the machine, for increased safety and to obtain the best results.
To better stress the importance of some basic passages, they have been marked by some preceding
symbols:
WARNING
Indicates imminent risks which may cause serious injury to the operator or other persons. Be
careful and scrupulously follow the instructions.
CAUTION
A statement advising of the need to take care lest serious consequences result in harm to
material items such as the asset or the product.
1.2
MACHINE IDENTIFICATION
There is a identification plate fixed to the machine, containing the manufacturer’s data, serial number, year of
construction, and technical specifications.
1.3
CUSTOMER SERVICE RECOMMENDATIONS
Apply the machine to skilled and authorized technical staff to carry out any operation dealing with parts disassembly.
Keep to the instructions contained in this manual for the correct use of the machine.
CAUTION
Only the skilled and authorized staff shall use the service the machine after reading this manual.
Respect the accident prevention regulation s and the general safety and industrial medicine rules.
2. SAFETY PRECAUTIONS
2.1
SAFETY REGULATIONS
WARNING
Read carefully the operation and maintenance manual before starting, using, servicing
and carrying out any other operation on the machine.
The manufacturer disclaims all responsibilities for damages to persons or things, which might be caused by any failure to
comply with the safety regulations.
- It is prohibited to use the machine when under the influence of alcohol, drugs or medication.
- The operators must carefully read the manual paying particular attention to the warning and safety notes. Furthermore,
they must be informed on the dangers associated with use of the machine and the precautions to be taken, and must be
instructed to periodically inspect the guards and safety devices.
- Before carrying out adjustment, repair or cleaning work, disconnect the machine from the electric power by
setting the main switch to stop.
- After an initial bedding-in period or many hours of operation, the driving belts may slacken; this causes an
increase in the tool stopping time (the stopping time must be less than 10 seconds). Immediately tighten them.
-3-
