2
2
2
2
21
1
1
1
10 W
0 W
0 W
0 W
0 Wood County Industrial P
ood County Industrial P
ood County Industrial P
ood County Industrial P
ood County Industrial Park, P
ark, P
ark, P
ark, P
ark, P.O. Box 1
.O. Box 1
.O. Box 1
.O. Box 1
.O. Box 1686, P
686, P
686, P
686, P
686, Parkersburg, WV 26
arkersburg, WV 26
arkersburg, WV 26
arkersburg, WV 26
arkersburg, WV 261
1
1
1
102-1
02-1
02-1
02-1
02-1686
686
686
686
686
3
Mission Mantle Clock Kit Parts List
Part #
Part #
Part #
Part #
Part #
Qty
Qty
Qty
Qty
Qty
Description
Description
Description
Description
Description
Dimensions, T” x W” x L”
Dimensions, T” x W” x L”
Dimensions, T” x W” x L”
Dimensions, T” x W” x L”
Dimensions, T” x W” x L”
Wood Components:
Wood Components:
Wood Components:
Wood Components:
Wood Components:
1 ............ (1) ......... Clock base ................
1
/
2
" x 6
3
/
4
" x 3
3
/
8
"
2 ............ (1) ......... Clock top ...................
1
/
2
" x 5
3
/
4
" x 3
3
/
8
"
3 ............ (1) ......... Clock front ................
1
/
2
" x 4
3
/
8
" (top)/5
7
/
16
" (bottom) x 10"
4 ............ (2) ......... Side panels ...............
5
/
16
" x 2
1
/
2
" x 10"
5 ............ (1) ......... Interior base .............
3
/
8
" x 2" x 5
1
/
16
"
6 ............ (1) ......... Interior top ...............
3
/
8
" x 2" x 3
15
/
16
"
7 ............ (1) ......... Plywood case back ..
3
/
16
" x 4" (top)/5
1
/
16
" (bottom) x 9
31
/
32
"
8 ............ (1) ......... Dialboard ..................
3
/
4
" x 3
3
/
4
" (top)/4
3
/
16
" (bottom) x 4
5
/
16
"
Hardware:
Hardware:
Hardware:
Hardware:
Hardware:
(4) ......... #8 x 1" Brass Flat Head Wood Screws
(4) ......... #6 x
5
/
8
" Brass Flat Head Wood Screws
(2) ......... #4 x
5
/
8
" Brass Flat Head Wood Screws
Quartz Movement/Accessories:
Quartz Movement/Accessories:
Quartz Movement/Accessories:
Quartz Movement/Accessories:
Quartz Movement/Accessories:
(1) ......... Quartz movement w/mounting hardware
(1) ......... Mission Style hands set
(1) ......... 3
7
/
8
" Mission Style dial
(1) ......... “AA” battery
1
1
1
1
1
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
6
6
6
6
6
2
2
2
2
2
8
8
8
8
8
7
77
7
7
Most of the flat surfaces of the Mission Mantle Clock have been factory sanded, but final finish sanding may be required
according to personal preferences. If additional sanding is required, sand all parts prior to assembly.
If additional sanding is required, sand all parts prior to assembly.
If additional sanding is required, sand all parts prior to assembly.
If additional sanding is required, sand all parts prior to assembly.
If additional sanding is required, sand all parts prior to assembly.
Sanding should be accomplished in a series of steps. Begin with a medium grit (120 or 150) paper and remove any scratches
or blemishes. Final sanding should be accomplished with a 180 grit paper, removing the scratches left by previous coarser
paper. We do not recommend that you sand oak with anything finer that 180 grit paper as the wood will not be very
We do not recommend that you sand oak with anything finer that 180 grit paper as the wood will not be very
We do not recommend that you sand oak with anything finer that 180 grit paper as the wood will not be very
We do not recommend that you sand oak with anything finer that 180 grit paper as the wood will not be very
We do not recommend that you sand oak with anything finer that 180 grit paper as the wood will not be very
receptive to stain.
receptive to stain.
receptive to stain.
receptive to stain.
receptive to stain.
Take care not to deform the crisp lines of the bevels if sanding is performed on the clock top.
Take care not to deform the crisp lines of the bevels if sanding is performed on the clock top.
Take care not to deform the crisp lines of the bevels if sanding is performed on the clock top.
Take care not to deform the crisp lines of the bevels if sanding is performed on the clock top.
Take care not to deform the crisp lines of the bevels if sanding is performed on the clock top.
Case Assembly
2
1.
1.
1.
1.
1. In a dry run, position the clock front (#3), face down on a flat horizontal surface. Place the non rebate edge of the side
panels (#4) into the rebate on the clock front. The smooth, non rebate side of the side panel should be on the outside of the
clock. Slip the top (#6) and bottom (#5) interiors between the side panels so that the countersink borings are on the inside of
the clock case..
2.
2.
2.
2.
2. Practice clamping or “rubber banding” the components together, ensuring that all pieces are flush on the top and bottom of
the case. When comfortable with the dry run procedure, glue the case
assembly together in the order described below.
3.
3.
3.
3.
3. Spread glue onto both the horizontal and vertical surfaces of the
1
/
4
"
rebate on the clock front. Spread a thin film of glue on the “mating” surfaces
of the side panels.
4.
4.
4.
4.
4. Place the non rebate edge of each side panel into the rebate of the clock
front.
5.
5.
5.
5.
5. Spread glue on both ends of the top and bottom interior pieces. Position
Position
Position
Position
Position
the top and bottom interior pieces into place between the side panels so
the top and bottom interior pieces into place between the side panels so
the top and bottom interior pieces into place between the side panels so
the top and bottom interior pieces into place between the side panels so
the top and bottom interior pieces into place between the side panels so
that the countersink borings are on the inside of the clock case.
that the countersink borings are on the inside of the clock case.
that the countersink borings are on the inside of the clock case.
that the countersink borings are on the inside of the clock case.
that the countersink borings are on the inside of the clock case.
6.
6.
6.
6.
6. Using lightweight “F” style clamps or rubber bands, clamp the assembly
until dry. Ensure that the side panels and top/bottom interior pieces are
Ensure that the side panels and top/bottom interior pieces are
Ensure that the side panels and top/bottom interior pieces are
Ensure that the side panels and top/bottom interior pieces are
Ensure that the side panels and top/bottom interior pieces are
flush with the top and bottom edge of the clock front. Failure to achieve
flush with the top and bottom edge of the clock front. Failure to achieve
flush with the top and bottom edge of the clock front. Failure to achieve
flush with the top and bottom edge of the clock front. Failure to achieve
flush with the top and bottom edge of the clock front. Failure to achieve
a flush fit will result in an ill fitting base and top.
a flush fit will result in an ill fitting base and top.
a flush fit will result in an ill fitting base and top.
a flush fit will result in an ill fitting base and top.
a flush fit will result in an ill fitting base and top.
1
Surface Preparation
