WOODCO Nova 2, Technical Manual, Page: 20 / 36

Instructions manual NOVA 2 vacuum unit
1/04/17 Rev:1.0.0
20
10 USE OF THE CENTRAL UNIT
When Nova 2 vacuum unit is connected to the power supply, it can be started every time the
Control Panel asks for it or when a fl exible hose is plugged into any of the vacuum inlets, after the
section valve for manual division has been closed.
This is made by an electric contact inside the electric board of the Control Panel, or inside the
vacuum inlet, that lights up the motor of the vacuum unit.
Routine maintenance involves the dust bin to be emptied and the fi lter cartridge to be regularly
cleaned.
3
1
2
0
OFF
OF
F
ON
3
1
2
0
OFF
OF
F
ON
Turn right the regulator to increase the va-
cuuming time to transport the fuel from the
stock tank to the Dispenser (see Control
Panel manual).
1
Press the power button, the
Power led lights up and the
fuel transport system starts.
2