R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
www.woodbridgebath.com
3
•Improper use of the product.
Do not place towels or anything else over guide rail. Aggressively opening or
closing the slider may cause trauma to the glass which could lead to breakage.
•Do not attempt to cut tempered glass.
•Always wear safety equipment such as goggles, work gloves, proper footwear
etc... during installation.
•Instruct homeowner on how to conduct periodic inspections and how to
properly maintain the glass and all hardware.
•Consideration should be given when installing tempered glass products in
households with young children or elderly.
PREPARATION
•Thoroughly read the instructions before installing or using the product.
•After boxes and packages are open, before installation, check that all items
from the parts list are there by marking each one off the list.
•Examine the glass and parts for defects or damage.
•Please note that Woodbridge will not replace any missing or damaged items
free of charge after 5 business days or if the product has been installed.
•Building codes vary by location and you should refer to your local building
codes when installing. WoodBridge is not responsible for code compliance and
will not accept returns on that basis.
•Prior to installation ensure that all surfaces are smooth and even. Ensure the
dam/curb/threshold is level side to side and that it has slope/fall in the direction
of the shower pan. Ensure the walls are plumb and the opening measures the
same top and bottom. Ensure that the installation surface is solid and able to
support the weight of the doors.
•Please note that irregular installation surface, round lower corners, or out of
plumb walls will result in serious problems for your installation.
•Some adjustments and drilling/screwing will be necessary throughout
installation.
•Woodbridge shower doors are not designed to be installed on fiber glass
surrounds that have round lower corners or lack of solid mounting surface.
•Glass must never be set down directly on any hard surface. Always use pieces
of wood or thick cardboard to protect lower edge at all times. Leave corner
protectors in place until it is time to remove them
