Woodbridge BW5100S, Installation And Care Manual

Page: 15 / 20

R
WOODBRIDGE WOODBRIDGE
WOODBRIDGE WOODBRIDGE
R
WOODBRIDGE WOODBRIDGE
WOODBRIDGE WOODBRIDGE
R
WOODBRIDGE WOODBRIDGE
WOODBRIDGE WOODBRIDGE
R
WOODBRIDGE WOODBRIDGE
WOODBRIDGE WOODBRIDGE
R
WOODBRIDGE WOODBRIDGE
WOODBRIDGE WOODBRIDGE
R
WOODBRIDGE WOODBRIDGE
WOODBRIDGE WOODBRIDGE
www.woodbridgebath.com
14
R
WOODBRIDGE
Emergency troubleshooting
Replacement of battery
Unplug the DC plug on of the battery box
and remove the battery box from the bottom
of the toilet.
Remove the battery box cover and
replace old batteries with new batteries,
re-install the cover.
Insert the battery box's DC plug into the
DC socket of toilet and stick the battery box
to the Velcro on the bottom of the toilet.
(Only apply to models with wave-to-flush function)
1.Sensor module is low voltage
Step III Step II Step I
No water supply Low voltage battery determination
and replacement
Put around 8L water into a barrel and
During the use of the product, wave to sense,
the indicator light of the sensor module quick
flashes 5 times, indicating that the battery is
low voltage and needs to be replaced.
Unsrew the screws on the back cover and
remove back cover from the sensor module,
replace batteries and tighten the screws
again.
Note:
1. Battery must be 1.5 V "AAA" size alkaline
battery.
2. Different brands, different used and new
batteries can not be mixed.
3. Battery life will be significantly reduced
when using non-alkaline batteries.
flush the bowl of ceramic.
Note: Avoid water spilling from bowl.