Woodbridge B0960S, Installation And Care Manual

Page: 16 / 20

R
WOODBRIDGE WOODBRIDGE
WOODBRIDGE WOODBRIDGE
R
WOODBRIDGE WOODBRIDGE
WOODBRIDGE WOODBRIDGE
R
WOODBRIDGE WOODBRIDGE
WOODBRIDGE WOODBRIDGE
R
WOODBRIDGE WOODBRIDGE
WOODBRIDGE WOODBRIDGE
R
WOODBRIDGE WOODBRIDGE
WOODBRIDGE WOODBRIDGE
R
WOODBRIDGE WOODBRIDGE
WOODBRIDGE WOODBRIDGE
www.woodbridgebath.com
15
R
WOODBRIDGE
ELECTRONIC BIDET TOILET
Power
Flush
Press "flush" button to activate full flushing.
Dry
Front
Rear
Remark:
,
1. Long press "power" button to enter standby mode; and then quick
press "power" button to restore functional mode.
2. When people sit, press "power" button to stop the function of
rear, front cleaning or drying. When no one sits, press "power"
button to switch between function mode and power save mode.
Press "dry" button, warm wind will come out. After a circle or
user leaves the seat, it will automatically stop.
Press "front cleaning" button, the water will come out to clean
the front portion of body. It will automatically stop after a circle
of cleaning. If press "stop" or "power" button when using, the
function will stop immediately.
1. Press " rear cleaning" button, the water will come out to clean
the rear portion of body. It will automatically stop after a circle
of cleaning. If press "stop" or "power" button when using, the
function will stop immediately.
2. When no one uses, press "rear cleaning" button, then the wand
will stretch out to clean the nozzle and spray lance.
1. When main unit is in functional mode, the light of Power goes on; When
in energy save function, the light of Power goes off, and energy saver
lights on; When in standby mode, both lights are off.
2. The default setting of all function is on middle level, after using controller,
shift to the level setted last time.
The illustration of main unit keys