background image

R

WOODBRIDGE 

R

WOODBRIDGE 

R

WOODBRIDGE 

R

WOODBRIDGE 

R

WOODBRIDGE 

R

WOODBRIDGE 

R

WOODBRIDGE 

R

WOODBRIDGE 

R

WOODBRIDGE 

R

WOODBRIDGE 

R

WOODBRIDGE 

R

WOODBRIDGE 

CLEANING & TROUBLESHOOTING (FILL VALVE)

Shut off water supply line 

before filter cleaning.

Water level is too high or
too low

Improper water level 
adjustment

Adjust the water level

Fill valve fails to shut off
or fails to fill the water 
into the toilet's tank

Use soft sponges or soft-cloths to clean the surface. Always rinse thoroughly any cleaning solutions immediately after cleaning. Do 
not any chemical remain on the surface for extended periods of time.

Do not pour any mounts of chlorine or any other chemicals into the tank. Use of chemical products will result in damage to the fill valve and 

flush valve components and may cause flood and property damage and will void warranty.

Note: 

fill and flush valves are maintenance free. No maintenance is required.

1. Inlet valve switch is 
turned on.
2. Inlet valve float crashed 
against ceramic wall

3. Filter screen is clogged 
due to dirty water
4. Improper refill hose 
installation

1. Turn on inlet valve switch
2. Adjust inlet valve position
3. Clean the filter screen
4. Install refill hose correctly (see 

diagram on the right)

Carefully, take out the filter 

from inlet by using pliers.

Use water to wash and clean 

the filter and adapter from any 
debris.

Re-install the filter and 

re-connect the water supply 
line.

FILL VALVE CLEANING

TROUBLESHOOTING

FILL/FLUSH VALVES MAINTENANCE & CARE

MAINTENANCE & CARE

Issue

Cause

Solu

ti

on

Solu

ti

on #4

RIGHT

WRONG

Water

Level

Retain these installa

ti

on instruc

ti

ons for future reference!

IMPORTANT! 

DO NOT USE: 

Abrasive cleaners such as: acid, ammonia, bleach, and simmilar solutions. Use of such solutions may cause 

corrosion, finish peeling, and/or dull the surface.

DO NOT USE: 

Abrasive sponges or cloth. Never use steel, wool, or wired brushes that will permanently scratch the surface.

Customer Service Phone: 562-229-0088. (Monday - Friday 9 AM - 5 PM Paci

fi

c Time)

 Or Email: [email protected]

R

WOODBRIDGE 

DELUXE  ONE PIECT  TOILET

Thank you for using WoodBridge products!

9

www.woodbridgebath.com

Summary of Contents for B0942













Reviews: