OPERATING, SERVICING & PARTS MANUAL
fds9200 TURF DETHATCHER
davidgolf.com.au
|
1300 790 890
|
davidturf.com.au
5.0 Operations on the Turf:
The pattern of operation during use of the fds9200 Turf Dethatcher should be much the same as
that followed for fairway mowers. A tight line pattern can be followed by lifting the unit at the end
of each run before making the turn. Normally, only one pass should be needed to loosen sufficient
thatch with the fds9200 Turf Dethatcher. However, if a second pass is desired it should be made
using a pattern that crosses over the prior one.
In confined areas, or around trees, other planting areas, sand traps, water hazards, cart paths and
other irregular features, the fds9200 Turf Dethatcher can be pulled through any turns or irregu
-
larities without difficulty.
6.0 Components of the fds9200 Turf Dethatcher:
No.
Description
1
Upright Frame with Three Point Hitch
2
Platform Pivot Connector (4 total)
3
Platform Frame Section (4 total)
4
Tines (64 per section, 256 total)
5
Transports Chains (8 total)
6
Gauge Wheel Assembly (2 total)
7
Pivot Bolt ( 8 total)
8
Section Connect Chain (6 total)
9
Chain Netting (8 total)
For more information and any service requirements on the fds9200 Turf Dethatcher contact your
local David Golf representative or call 1300 790 890 or email: [email protected]
