9
An ongoing program of product improvement may require us to change
specifications without notice.
WS-GFT-CE, Revised April 2015.
Doc no: M0054.01
or visit
woodstone-corp.com
wood stone corporation
1801 w. bakerview rd.
bellingham, wa 98226 usa
t. +1.360.650.1111
f. +1.360.650.1166
Tandoor CE Installation and Operation Manual
GAS CONNECTION
The gas connection is made at the lower rear of the appliance� See next page for details�
This appliance is equipped with casters; it must be installed using the casters supplied with an approved gas connector/quick
disconnect device in accordance with all pertinent national and local regulations� It must also be installed with restraining means to
guard against transmission of strain to the connector�
IMPORTANT:
The gas supply to this appliance should be equipped with an individual appliance shutoff valve that is capable
of completely isolating the appliance from the main gas supply� This valve should be installed in such a manner as to be readily
accessible to the operator of the appliance�
The Wood Stone gas-fired Tandoor is equipped with a 19mm (3/4") BPT female gas connection, located on the underside of the
rear of the unit� Anchor points for the restraining means are provided on the underside of the Tandoor; these are holes punched in
the rear portion of the drip/debris pan rails�
GAS RATINGS
GAS SPECIFICATIONS
Model
WS-GFT-31 and WS-GFT-35
Input (kW)
11�7
11�7
11�7
14�2
11�7
14�2
14�2
Gas Group
I
2H
I
2L
I
2E
I
3+
I
3P
I
3B/P
I
3B/P
Inlet Pressure (mbar)
20
25
20
28-30/37
30/37/50
28-30/37
50
Gas Pressure at Valve Outlet
(mbar)
10
10
10
25
25
25
25
THIS APPLIANCE IS NOT FOR USE WITH SOLID FUEL
GAS CODE LIMITATIONS
The installation of this appliance must conform with local codes, or in the absence of local codes, with the National Fuel Gas
Code, ANSI Z223�1, the Natural Gas installation Code CAN/CGA-B149�1 or the Propane Installation Code, CAN/CGA-B149�2, as
applicable�
The appliance and its individual shutoff valve (supplied by others) must be disconnected from the gas supply piping system during
any pressure testing of that system at test pressures in excess of 1/2 psi (3�45 kPa)�
The appliance must be isolated from the gas supply piping system by closing its individual manual shutoff valve (supplied by others)
during any pressure testing of the gas supply piping system at test pressure, equal to or less than 1/2 psi (3�45 kPa)�