Sawmill Assembly
Uncrating the mill
Sawmill Assembly
WMdoc122320
3-2
3
See Figure 3-1.
NOTICE:
Raise the saw head slowly to adjust for load shift. The saw
head is heavier on the engine side.
4.
Set the mast on the blocks called out in Section 3.1 Tools required. See Figure 3-2.
CAUTION!
Use care to protect the adjustment screws at the bottom of
the mast. See Figure 3-2.
See Figure 3-2.
FIG. 3-1
FIG. 3-2
LX25018-09
Three point
attachment
TOP VIEW
NOTICE:
Do not catch wires between lifting strap and frame.
LX25018-10