Operation
Starting The Engine
2
2-1
WM doc 9/18/19
Operation
SECTION 2 OPERATION
2.1
Starting The Engine
Engine Control Lights
See Figure 2-1.
The following indicator lights are located on the sawmill control panel.
Alternator Charge Indicator:
Lights up if the alternator is not charging the battery.
Engine Temperature Indicator:
Not used.
Key Switch Indicator:
Lights up when the key is in either the on or accessory (#1 or #3)
position.
Oil Indicator:
Lights up if the oil pressure is too low. The engine will automatically switch to
low idle if a low oil condition occurs.
Glow Plug Indicator:
Not used.
Engine Start
DANGER!
Always be sure the blade is disengaged and all persons are
out of the path of the blade before starting the . Failure to do so will
result in serious injury.
FIG. 2-1
