Operation
Starting The Engine
Operation
WMdoc072919
2-1
2
SECTION 2 OPERATION
2.1
Starting The Engine
Engine Control Lights
See Figure 2-1.
The following indicator lights are located on the sawmill control panel.
Alternator Charge Indicator:
Lights up if the alternator is not charging the battery.
Engine Temperature Indicator:
Lights up if the engine is overheating. A circuit breaker
assembly in the engine harness will shut the engine off if the engine overheats. Turn the
key switch off and allow the engine to cool for a period of time before restarting. If the
overheating condition persists, stop operating the engine until the condition is corrected.
Key Switch Indicator:
Lights up when the key is in either the on or accessory (#1 or #3)
position.
Oil Indicator:
Lights up if the oil pressure is too low. The engine will automatically switch to
low idle if a low oil condition occurs.
Glow Plug Indicator:
Lights up after the key has been turned to the on (#1) position.
FIG. 2-1