
Adjusting the braking system
Adjusting the brake rod and Bowden cables
Adjusting the braking system
TUVdoc053121
3-3
3
3.2
Adjusting the Brake Rod and Bowden Cables
See Photo 3-3
1.
If it is necessary to replace the brake rod, first pass the new rod through the handles
mounted on the frame.
See Photo 3-4
2.
Install the jam nut (3) on the brake rod (1) from the side of the overrun assembly.
3.
Then screw the brake rod (1) in the sleeve of the fork head (2) all the way and secure with
the jam nut (3).
PHOTO 3-3
1
U
Rod
Handle