©2011
WOO
AUDIO
tm
Inc.
All
rights
reserved.
www.wooaudio.com
Rev
1.0.
June
10,
2011.
10
Turning the amplifier on:
1.
Turn the volume knob to the lowest position.
2.
Insert a headphone into either HIGH or LOW impedance output.
3.
Turn the power switch knob
④
from left to right until you hear a click sound. The LED
⑤
will light.
4.
Observe that all tubes light gradually.
5.
Let the tubes warm up for at least 1 minute before turning up the volume.
Front panel diagram:
①
High impedance headphone output
②
Volume control
③
Low impedance headphone output
④
Power switch
⑤
Power
LED indicator
Break-in period:
It is recommended to allow the amplifier to operate 150+ hours so that peak performance can be
realized. An effective way to break-in the amp is to run the amp normally with music playing.
Please do not leave the amp running continuously.
