On Screen Display Menu
On Screen Display Menu
15
MIN PTZ CAMERA
14
MIN PTZ CAMERA
By using scan function, the camera moves between 2 positions if there is no PTZ command after
passing the assigned dwell time. The scan function runs and the camera moves from the position
assigned as the start point to the position assigned as the end point in CW (Clockwise) direction.
3) Scan
MOTION MENU
PRESET
TOUR
SCAN
PATTERN
AREA
ALARM
PRIVACY
EXIT BACK
< NEAR / RIGHT SCAN >
< NEAR / RIGHT SCAN >
SCAN MENU
SCAN NO
LABEL
START POS
END POS
SPEED
DWELL
FOCUS
: 01 UNDEFINE
:
: XXX.X, XXX.X
: XXX.X, ---
: XX
: XX
: NONE
SAVE CLR BACK EXIT
- SCAN NO
It’s available to set the desired label, displayed on the executing screen of scan.
After the label is set, push NEAR button to go out.
- LABEL
< NEAR / RIGHT LABEL SEL >
SCAN MENU
SCAN NO
LABEL
START POS
END POS
SPEED
DWELL
FOCUS
: 01 UNDEFINE
:
: XXX.X, XXX.X
: XXX.X, ---
: XX
: XX
: NONE
SAVE CLR BACK EXIT
- END POSITION
- START POSITION
< NEAR / RIGHT END POS >
SCAN MENU
SCAN NO
LABEL
START POS
END POS
SPEED
DWELL
FOCUS
: 01 DEFINE
:
: 000.0, 000.0
: 000.0, ---
: 60
: 02
: AUTO
SAVE CLR BACK EXIT
SCAN END POSITION
POSITION : 000 .0
< EXIT FOCUS NEAR >
- SPEED
< NEAR / RIGHT MOVE SPEED >
SCAN MENU
SCAN NO
LABEL
START POS
END POS
SPEED
DWELL
FOCUS
: 01 DEFINE
:
: 000.0, 000.0
: 000.0, ---
: 60
: 02
: AUTO
SAVE CLR BACK EXIT
Set the Scan speed
Increase : or
Decrease : or
JOYSTICK
JOYSTICK
It adjusts the moving speed from 0~63 steps.
SCAN LABEL EDIT <01>
)
L
X
0
A
M
Y
1
B
N
Z
2
C
O
.
3
D
P
/
4
E
Q
,
5
F
R
+
6
G
S
-
7
H
T
=
8
I
U
<
9
J
V
>
(
K
W
@
LABEL :
<STORE TELE MOVE JOY >
<DEL WIDE BACK NEAR>
Move : Select : or or
JOYSTICK
Delete : or
JOYSTICK
TELE
WIDE
or
Define the End pan position
①
Select End Pos menu
②
Move and set the position
③
Go back
NEAR
NEAR
Define the Start pan position
①
Select Start Pos menu
②
Move and set the position
③
Go back
or
NEAR
NEAR
TELE
WIDE
- Scan No. : Max. 4 Scans can be stored.
- Label : The each Tour can have its own label name.
- Start position : Assign the coordinate of the Scan starting
position.
- End position : Assign the coordinate of the Scan ending position.
- Move Speed : It enables to set the running speed in the each
coordinate.(1~63)
- Dwell : The Scan function runs after the dwell time without any
camera movement.
- Focus : It enables to set the camera focus.
< NEAR / RIGHT START POS >
SCAN MENU
SCAN NO
LABEL
START POS
END POS
SPEED
DWELL
FOCUS
: 01 DEFINE
:
: 000.0, 000.0
: 000.0, ---
: 60
: 02
: AUTO
SAVE CLR BACK EXIT
SCAN START POSITION
POSITION : 000 .0, 000 .0
< EXIT FOCUS NEAR >
SCAN MENU
01 02 03 04
< SEL NEAR/MOVE JOYSTICK >
