
3
1
Caution
:
Wear the glove and eye protection glass to protect the skin and eyes from refrigerant. Don
’
t use this
device near the fire or spark. Don
’
t expose this device into sunshine or rain. Avoid to contact with
corrosive liquid and gas. Keep good ventilation.
During transportation, strong vibration or bumping may damage the piping or loose some screws.
Please open the side door or back panel. Check if all the piping and wiring properly connected or not.
If any screws loosen, please fix them before you run the machine. Please also check if the pump oil
being at a modest level. Otherwise, please add some oil.
When receiving a new machine, please also check scale. When turn on the machine, users can see
the
“
REF. WEIGHT
”
, it is zero for a new machine. Put 1KG weight on top of cylinder, and see if the
weight will increase 1KG or nearly 1KG. If yes, the scale is sound and good.
Follow strictly the operation instruction on the machine.
2
Technical parameter
:
Type of cleaning liquid
:
R134a refrigerant
Voltage
:
AC 220V/60Hz (1PH)
Power: 1200W
Digital weight scale precision
:
10gram
Tank Capacity: 10kgs
Tank maximum pressure: less than 23KG/CM2 (330psi)
Life-time of filter drier: 60 cycles of flushing
3 Function
1.
Recovery
2.
Vaccum
3.
Charge
4.
Flush the the automobile A/C system
Summary of Contents for X565
