Wonder Tech W201L Instruction Manual Download Page 5

4

4.1 

Left traverse

Right traverse

Note: When you fly the plane toward the 

direction of the remote control is the opposite.

Aileron   Four aircraft left and right to control 

lateral movement.

Sensitivity Settings

This section axis can achieve three modes of operation: low, intermediate, and advanced.

Tap the elevator joystick enter setup mode:

Air Tumbling Skills

The sensitivity can be adjusted by remote control at the fine-tuning button, then press and hold the 

elevator for one second to confirm or exit.

Sensitivity larger the value, the faster the reaction axis; contrary slower.

This section by the following axis joystick can do a 360-degree roll flying. In order to perform rolling, 

ensuring ground to maintain the axis and 30 degrees, preferably during the operation of the rising 

roll model, this is easier to maintain the height of the micro-axis roll.

The current face of the basic movements are skilled when you can play some 

thrilling tumbling action,and then click on any rudder upper right comer of the remote 

control buttons,the remote emits a continuous sound drops,  this time into the 3D 

rollover state,then hit the remote control joystick in any direction to achieve 3D 

tumbling. 

Open the remote control to enter the low-level axis mode (sensitivity up to 40%)

When the remote control to issue a "bit" twice, axis into the intermediate mode (sensitivity up to 60%)

When the remote controller "DDD" three times, axis into advanced mode (sensitivity up to 100%)

Summary of Contents for W201L











Reviews: