Industrial 14G L3 Managed M12
PoE Switch
MP614 Series
・
Overview
・
Installation
・
Appearance
MP614-HV-A
Model Name
MP614-HV-X
MP614-MV-A
MP614-MV-X
Description
Industrial 14G L3 Managed M12 A-code
PoE Switch, 110V
Industrial 14G L3 Managed M12 X-code
PoE Switch, 110V
Industrial 14G L3 Managed M12 A-code
PoE Switch, 54V
Industrial 14G L3 Managed M12 X-code
PoE Switch, 54V
MP614-WV-A
MP614-WV-X
Industrial 14G L3 Managed M12 A-code
PoE Switch, 24-110V
Industrial 14G L3 Managed M12 X-code
PoE Switch, 24-110V
・
Package Checklist
www.womaster.eu
Quick Installation Guide
100/1000Base-T
MP614-HV/MV/WV-A MP614-HV/MV/WV-X
Pin
1
D3-
D1+/PoE V+
2
D4+
D1-/PoE V+
D4-
D2+/PoE V-
D1-/PoE V+
D2-/PoE V-
D2+/PoE V-
D4+
D1+/PoE V+
D4-
D3+
D3-
D2-/PoE V-
D3+
3
4
5
6
7
8
The new exclusive MP614 Series is the first full Gigabit routing PoE switch
designed for Layer 3 network on rail public transport. Equipped with 14
rugged Gigabit M12 ports, 8 of which supply intelligent PoE/PoE+ and 2
of which with embedded link bypass function guarantees sustainable
connectivity in critical applications, even in case of device/power fault.
The advanced Layer 3 routing protocols such as IP/VLAN routing, RIP,
OSPF, VRRP are fully compatible with your backbone network. Full 14
Gigabit ports bring forward an ultra speed connectivity without any
bottleneck. The comprehensive Cyber Security design safeguards the
network from outside intrusion.
Wall mounting
Follow the steps to install the wall-mounting plate:
1. Install the wall-mounting plate onto the side panel of the switch.
2. Tightened all of the screws well.
3. Use the hook holes at the corners of the wall mounting plate to hang the
switch on the wall.
100/1000Base-T, M12 8 pin A/X-Code Female
Grounding
There are two grounding screws on the device.
One is located on the front side of the switch
and the other one is located on the left side. For
avoiding system damage by noise or electric
shock, establish a direct connection between
the device and earth ground. Please refer to
Appearance Section.
MP614 Series Connector
MP614 Series Switch uses several types of M12 connector for the
power input, Gigabit ports and console port for management and
system backup. The connector is different from the common connector
in other switches. Below are some descriptions about the connector.
Wiring the Power Inputs
For DC power inputs
(MP614-HV: 110VDC (77~137.5VDC) / MP614-MV:
54VDC (46~57VDC) / MP614-WV: 24/48/110VDC (16.8~137.5VDC))
1. Insert positive and negative wires into V+ and V- contacts respectively
of the M12 connector (Plug-side).
2. Tighten the nuts to prevent the loosening of the M12 connectors.
3. Power input supports power redundancy and polarity-reverse protec-
tion functions.
*The Power Supply is not included, please prepare one yourself.
www.womaster.eu
．
1 x Product Unit
．
1 x Wall Mount Kit (2 x Wall mount plate)
．
1 x Quick Installation Guide
Optional Accessory for detailed information please refer to the Datasheet
．
M12 A-code 4Gb USB disk for device configuration, firmware update
．
Console Cable DB9 Male to M12-A-code Male, 1Meter
．
Field assembled M12 connector, 4-pin, A-code
Wall Mounting Screw
on front side
Wall Mounting Screw
on back side
Grounding Screw
Power Connector
・
1 x M12 4 pin A-Code
Ground Screw
IEEE 802.3 af/at PoE
・
8-port 100/1000MBase-T M12
8-pin A-Code or X-Code
Gigabit Ethernet
・
6-port 100/1000MBase-T M12
8-pin A-Code or X-Code
・
2-port with Bypass Function
(Port 13/14)
Easy System Management
・
1 x M12 8 pin A-Code
・
USB for Configuration/Firmware update
・
RS232 console
Wall Mount
Screw Holes
for Front / Back
Panel
System LED
・
1 x Power
・
1 x System Status
・
1 x Ring Status
・
1 x ALM
・
14 x Ethernet Port
・
8 x PoE
Power Connector
Description
Pin
1
V+
2
V+
V-
V-
3
4
Console/ USB Port – M12 8 pin A-Code Female
Power Connector
Description
Pin
1
TX
2
RX
Signal Ground
N/A
3
4
5
USB Data+
6
USB Data-
USB Power 5V
USB GND
7
8
