21
Configure Date/Time
The date and time formats can be set by selecting this menu. First the Select Time Zone menu offers a choice of 32
standard zones, then Daylight Saving can be enabled or disabled and, finally, the Select Time Format menu offers
5 display formats for the date and time, which are obtained automatically from the Internet.
Select Profile
If Profile Management is enabled, the Select Profile item will be seen. It can be used to change the active Profile.
The active profile is identified by an asterisk ( [*] ). To change profile, simply highlight the new profile and select it. The
WorldRadio will then display the message Restart Device while the new Profile is being activated.
Device Status
Select this useful item to scroll up/down through a list of all settings in the active Profile. This is pure
information –nothing can be changed while scrolling through this item.
Configuration Wizard
The WorldRadio Configuration Wizard guides you through the process of configuring network profiles. It is used
when you want to use the remote control to:
Install your WorldRadio for the first time
Make changes to your network profile settings or
Explore the more advanced options offered by your WorldRadio.
a. Network Information Needed by the Configuration Wizard
The Configuration Wizard guides you through the setup process, prompting you to select or edit all the settings for
any of the available WorldRadio Profiles.
1. Your WorldRadio determines some settings automatically during its search for available networks.
Therefore it may not need to prompt you for all of settings during the process described below.
2. You can leave the Configuration Wizard at any time by pressing again. You will then be asked to
confirm that you want to exit the Wizard and discard all changes.
b. STARTING THE CONFIGURATION WIZARD
The Configuration Wizard will start automatically the first time you power up your WorldRadio.
To start the Configuration Wizard at a later time:
1. Press to display the Configuration menu.
2. Scroll up/down until Configuration Wizard is highlighted, and select it. When the introductory message appears,
press
to go to the next screen and begin the setup process.
1. This process requires you to know some technical details of how your network is set up. If you are unsure
of any of the settings, consult the person who set up your network, or refer to the appropriate network
documentation.
2. Please refer back to Edit Screens on page 7 for instructions on entering and changing text and numbers,
using the Remote Control.
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
