7
1. Prepare Transmitter
You can connect the transmitter to audio devices such as smart phones,
tablet PC, MP3 players, or many others using Bluetooth connection or the
included 3.5mm audio cable.
Plug the included AC/DC power adapter to an electrical wall AC
outlet.
Insert the AC/DC power connector into the DC female-jack located on
the back of the transmitter.
Switch the POWER switch to ON, the Power LED on the transmitter
will be red.
Press the LINE-IN / BT button to confirm the LINE-IN input mode (if
necessary). The transmitter's default setting is LINE-IN, MODE LED
will be red.
Connect audio devices to the audio cable and play. The Power LED
will remain steady in red color.
.
Plug the included AC/DC power adapter to an electrical wall AC
outlet.
Insert the AC/DC power connector into the DC female-jack located on
the back of the transmitter.
Switch the POWER switch to ON, the Power LED of the transmitter
will be red.
Press the LINE-IN / BT button to confirm the Bluetooth input mode.
MODE LED will turn to blue, and the BT SYNC LED will flash
between blue and red.
Turn on Bluetooth setting in your audio device to search for the
Wolverine. When your device found the Wolverine, a device by the
name "Wolverine_SPK" will show.
Select and connect Wolverine_SPK and play audio. The BT SYNC
LED will turn steady in blue color.
The Power LED will remain steady in blue color. The transmitter will
remain in Bluetooth mode until it is powered off.
A. Connect transmitter with audio devices
.
.
.
.
.
B. Connect transmitter with bluetooth devices
.
.
.
.
.
.
.
WIOS-5.8 OPERATIONAL PROCEDURES
