background image

Basket/Rugby

28

Wolturnus - Wheelchair for Sport Use - User’s Manual 2016

29

Basket/Rugby

Wolturnus - Wheelchair for Sport Use - User’s Manual 2016

Adjustment and set-up

Adjustment and set-up

6.3 Adjusting the Back Depth and Form

The back’s form can be adjusted to suit the individual user’s requirements for support and ba-

lance. The Velcro straps under the back upholstery are used to adjust the back´s form.

•  Fold up the back of the backrest upholstery to make the Velcro straps  visible (Image 15).
•  Loosen or tighten individual straps so that the back’s form suits the user’s requirements 

(Image 16). 

• 

Fold down the back upholstery and secure it to the straps.

Adjustments  to  the  back  form  and  depth  affects  the  benefit  the  user  gets  from  the  chair 

 

substantially. Wolturnus A/S recommends that the form and the depth are initially adjusted 

with assistance from a Wolturnus A/S consultant or from the user’s therapist.

6.4 Adjusting back height (only height-adjustable back)

The back height can be steply adjusted to meet requirements.

• 

Remove the back upholstery and top.

•  Press the spring lock in and either raise or lower the height bar for the back (Image 17).
•  To adjust the height even further, the height bar can be removed and reversed (image 18).
• 

Mount the back upholstery and top again.

6.5 Adjusting the Seat Length 

When delivered, the seat length has been adjusted according to the measurement provided in 

the customer´s order form, but it can be adjusted if required.

•  Remove the seat cushion and release the seat cover from the Velcro straps. (Image 19). 
•  Push or pull the seat cover into the desired position (Image 20). 
• 

Fasten the seat cover on the straps and mount the seat cushion.

 

 

 

When the seat and/or the back upholstery straps have been adjusted, the wheelchair’s point 

of gravity may have shifted, which may create a risk of backward tipping. Therefore, after 

adjusting the seat and/or bthe ack upholstery, check the point of gravity and, if necessary, 

adjust it before using the chair. (See section 6.7).

WARNING!

 Image 19 Release seat cover

 Image 20 Push or pull the seat cover

 Image 15 Fold the back of the upholstery 

 Image 16 Loosen or tighten the straps

 Image 17 Press the spring lock in

 Image 18 For further height adjustment

Summary of Contents for Basket and Rugby Wheelchair



























Reviews: