Manual, for Fixation of Wheelchair in Motor Vehicles 2018-2019
Active Wheelchair
5
2 Safety
If the label on the wheelchair contains the following symbol, the wheelchair may be used as a seat in motor ve
-
hicles (see image 1). If the wheelchair may be used as a seat in motor vehicles, it may only be vehicles approved
or adapted for such purposes.
All safety belts and restraints for transportation in a motor vehicle must live up to the following standards and
regulations.
Component
Standard
Wheelchair tiedown and occupant-
restraint systems
ISO 10542 or ECE 16
Wheeled mobility devices for use as
seats in motor vehicles
ISO 7176-19
The wheelchairs have been subjected to a crash test according ISO 7176-19 in a forward-facing direction. A
test dummy was secured in the wheelchair with a three-point belt. The Hawk wheelchair was tested with a
four-point system. The W5, A-run, and Rex350 wheelchairs were tested with a four-point system as well as
the Dahl Docking station. The wheelchairs have been tested with a totalt weight of the wheelchair which was
> 125 kg
(variation between models).
INFORMATION
Secure all screws, bolts, and nuts
Always check that all screws and nuts are secured to avoid a collapse of your wheelchair. Failure to do so
can cause serious injury or death.
WARNING!
Risk of injury due to wheelchair accessories
Make sure all accessories are removed from the chair or secured, to avoid unexpected movement which
can cause injury.
WARNING!
Risk of injury with incorrect use
Injuries due to pinching, crushing, tipping over, or falling due to incorrect user might occur, if all safety
instructions are not followed both within the user’s manual and the fixation systems manual.
WARNING!
Image 1 Icon for wheelchairs that may be used as seat in motor vehicles.
Summary of Contents for A-RUN
Page 2: ......
