Technical data:
Changing the lamp of the
Visualizer:
1. Remove the power cord of
the Visualizer.
2. Remove lamp housing glass.
(1 Screw)
3. Remove the safety clip
4. Change the lamp.
CAUTION: Hot when used!
Lamp type: Osram Dulux S/E
9W/21 or equivalent
1
2
1
m
m
(4
.8
")
3
1
0
m
m
(
1
2
.2
")
2
6
0
m
m
(
1
0
.2
")
1
1
3
m
m
(
4
.5
")
405 mm (15.9")
150mm (5.9")
5
8
0
m
m
(
2
2
.9
")
1
5
0
m
m
(5
.9
")
4
8
5
m
m
(
1
9
")
405 mm (15.9")
235mm (9.2")
Specifications and availability subject to change.
11
Camera
1-CCD 1/3" Progressive Scan Camera
Output signals
SXGA/XGA/SVGA (switchable), PAL/NTSC (switchable), USB
Pictures per second (as picked up by the camera)
20 frames (=full pictures)
Horizontal resolution
640 lines (with perfect edge focus)
Vertical resolution (measured with testcard somewhere in the picture)
640 lines (820 lines in Image Turn mode)
Vertical resolution (in lines from top to bottom)
490 lines (640 lines in Image Turn mode)
Image Turn mode (for increased resolution when picki ng up complete
portrait pages)
yes
Effective Pixel (=pixels actually used for the image information)
810,000
Total pixels of CCD:
840,000
Color reproduction
very good colors
Vertical image-frequency
Prog.Scan: 75 Hz or 60 Hz (switchable), PAL: 50H z, NTSC: 60Hz
Horizontal image-frequency
15.7 and 37.3 - 80 kHz
Signal format
non-interlaced and interlaced
Iris
automatic and manual
White balance adjustment
automatic and manual
Autofocus
yes
Manual focus
yes
Text enhancement function (i n color)
yes
On screen menu, On screen help and Menu reset function
yes
Upgradeable firmware (through software downloads from internet)
yes
Lens / Zoom
24 x zoom (12 x o 2 x digital)
Max object height on working surface
150mm (6") in tele position, 370mm (15") in wide position
Max. pick-up area on working surface
Length: 270mm (10.8"), Width: 360mm (14.4")
Max. pick-up area on working surface in Image Turn mode
Length: 360mm (14.4"), Width: 270mm (10.8")
Min. pick-up area on working surface (in full resolution, with optical zoom) 32 x 24 mm (1.2" x 0.9")
Min. pick-up area on working surface (with digital zoom)
16 x 12 mm (0.6" x 0.5")
Max. object outside of working surface
unlimited
Depth of focus on small object (42 x 33 mm)
18mm (0.7")
Depth of focus on large object (360 x 270 mm)
200mm (8")
Disturbing stray light
almost none
Blinding of audience or speaker
none
Light source
high frequency fluorescent lamp
USB software for image capture and controlling
included (for Windows 98/2000/ME/XP)
Time for still image capture through USB software
2 seconds
Reflection free area on working surface
360 x 230mm (17.3"x 9.2")
Quick recordings outside of the working surface possible
yes
Intelligent folding system
yes - pneumatic arm
User programmable presets
3 (plus 8 fixed presets trough RS232)
Special working surface for transparencies
yes
Slidedrawer
yes
Computer input / Input switch
yes (15-pin D-Sub plug)
Image memory
9 pictures (with a battery backup if power supply is disconnected)
"Show all" function
yes (displays all 9 pictures of current memory as one split image)
Alternative Image display:
negative image / negative-blue image / black and white image
PAL/NTSC video outputs (converted Progressive Scan s ignals)
1x S-Video (Y/C) 4-pin plug and 1x Composite Video (RCA -plug)
RGBHV (=data RGB) output (for SXGA, XGA and SVGA signals)
15-pin D-Sub-plug
DVI output (for SXGA, XGA and SVGA signals)
DVI-I (digital and analog)
USB port
yes
RS232 port and serial protocol with position setting and status report
9-pin Sub-D plug
Weight / Portability
5 kg (11 lbs), portable
Infrared remote control
included
Power (external power pack on portable units)
multi range 100-240 V weight: 0.3kg (0.6lbs)
Carrying case
included (soft case with side pocket for projector or notebook)
Made in
Austria (European Union)