Power-on preset:
The power-on preset is automatically activated when switching on the
unit. The settings are: middle zoom size (approx. image width of 14 cm)
autofocus: on, auto iris: on.
As soon as the Power Indication LED stays green illuminated, you can
start working with the Visualizer. The behavior of the unit once the
power has been supplied or after the POWER key has been pressed
can be changed in the unit's on-screen menu
(see page 10)
.
Setting Up the Visualizer
The working surface of the Visualizer
(#2)
has a special crystalline white color, which is especially designed
for perfect reproduction of transparencies.
In the following cases, an optional lightbox is recommended:
- If the transparency is very dark
- If the transparency is very wavy and causes reflections
- If the room light causes reflections on a transparency
The optional whiteboard foil can be used for direct annotation with special whiteboard markers. WolfVision
offers spare whiteboard foils.
markers and sponge cleaners
More information on
at
www.wolfvision.com
(Products / Accessories)
Working Surface
1. Connect the power pack to the POWER
(#18)
Alternative PoE+ can be used
(see page14)
.
2. Connect your display device (projector, monitor, video
conferencing unit etc.) to the appropriate output of
the
Visualizer
(#13, #14, #17 or #19)
.
IMPORTANT:
For choosing the right resolution on RGB and HDMI
outputs please read the detailed description on page 11!
3. Use the pull pad
(#11)
to lift the arm upwards
4. Turn camera head to working position (light cannot be turned).
5. Switch on the Visualizer with the POWER key
(#3)
.
IMPORTANT:
To fold the Visualizer, use pull pad only
(#11)
!
6
