R
Instructions
VZ-5D
English
Changing the lamp of the
Visualizer:
1. Remove the power cord of
the Visualizer.
2. Remove lamp housing glass.
(1 Screw)
3. Remove the safety clip
4. Change the lamp.
CAUTION: Hot when used!
Lamp type: Osram Dulux S/E
9W/21 or equivalent
1
2
1
m
m
(4
.8
")
3
1
0
m
m
(
1
2
.2
")
2
6
0
m
m
(
1
0
.2
")
1
1
3
m
m
(
4
.5
")
405 mm (15.9")
150mm (5.9")
5
8
0
m
m
(
2
2
.9
")
1
5
0
m
m
(5
.9
")
4
8
5
m
m
(
1
9
")
405 mm (15.9")
235mm (9.2")
Built-in camera system:
1 CCD unit – 1/3" interline transf er
Effective pixels:
PAL models: 752x582 / N TSC models: 768x494
Horizontal resolution:
> 470 TV lines
Iris:
automatic
Autofocus:
dynamic high speed, on/ off switch
White balance:
automatic
Optics (5,4 – 64,8mm, f=1,8~2,7):
24x zoom (12x o 2 x digital)
Depth of focus
(depth of field):
14mm (0,6") on smallest picture, size: 16x12m m (0,6"x0,5")
18mm (0,7") on small pict ure, size: 42x33mm (1,7" x1,3")
200mm (8") on largest pi cture, size: 360 x270mm (14,4"x10,8")
Camera control panel:
functions: zoom in, zoom out, autofocus on/off
Power and light control s:
power on/off, light on/of f or light on lightbox
Power-on preset:
autofocus on, autoiris on, pick -up size: 210x140mm
Light source:
high frequency fluorescent l amp
Light system:
light either on working surface or in front of the unit, no blinding of
audience or speaker, ver y low stray light
Objects on working surfac e
(length x width):
min.: 16x12mm (0,6"x0,5" ),
max:360x270mm (14,4" x10,8")
Objects on working surfac e (height):
up to 370mm (15") in wi de position - 110mm (4,4") in tele position
Objects in a room:
length, width, and height to infinity
Y/C (S-video) output:
4-pin connector, Y -signal: 1 Vpp 75
Ω
, C-signal: 0,3 Vpp 75
Ω
Composite video output:
RCA-connector, VBS 1,0 Vpp 75
Ω
12 V DC output:
for external lightbox or LCD -monitor
Power consumption:
max. 25 VA
Power source:
12 V DC
Made in:
Austria (European Comm unity)
Weight:
Visualizer: 4,6kg (10lbs ), Power pack: 0,7kg (1,1l bs)
Accessories (Scope of s upply):
Mains power pack:
90 – 240 V AC / 12 V DC, 1,5 A
Carrying case (Soft case)
included (standard editi on)
Other supplied accessori es:
Y/C (S-video) cable, instructi ons
Specifications and availability subject to change
Technical data:
PRECAUTIONS
WARNING!
To reduce the risk of electric shock, do not open the unit.
No userserviceable parts inside. Refer servicing to
qualified service personal only.
To reduce the risk of electric shock, do not expose this
appliance to rain or moisture
Risk of electric
shock - Dangerous
voltage inside
Made in: Austria (EC) Printed in Austria November 2001
Manufacturer:
Wolf Vision GmbH
, Vlbg. Wirtschaftspark, A-6840 Götzis / AUSTRIA, Tel. ++43-5523-52250,
Fax. ++43-5523-52249, E-Mail: [email protected]
American distribution:
Wolf Vision Inc
., 655 Sky Way, Suite 119, San Carlos, CA 94070 / USA
Tel. (650)802-0786 and 1-800-356WOLF, Fax: (650)802-0788, E-Mail: [email protected]
Asian representation:
WolfVision Rep office
, 27 Woodlands Ind. Park E1, #01-04 Hiang Kie Ind. Bldg. IV,
Singapore 757718 / Tel. ++65 - 366 9288, Fax: ++65 - 366 9280, E-mail: [email protected]
CONTACTS
:
Internet Homepage: http://www.wolfvision.com, Technical support by E-mail: [email protected]
UL
®
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
This product is built according to Directive EMC and to Directive electrical equipment.
Proofments according to UL 1950. CSA - C 22.2 No. 950-95
FCC
