12
This window displays the Device Names you set in “Device Settings” section.
a)
Click “Matrix Switcher” button in the above window to enter the following page:
b)
Configure the items in the picture above.
•
Delay (ms)
: Set the delay time for the command to be sent to the controlled device when press the
button. It can be left blank.
•
Interface
: Select the control interface from pull
-
down list. (Telnet or RS232).
Note
: Select the interface according to the actual connection requirements.
•
Command:
Select one command from the drop
-
down menu.
c)
Click “Save” to save the configurations.