WolfPack HDTVHDVE100 Quick Start Manual Download Page 1

Page: 1 / 2

HDTVSupply.com

FREE CONSULTATION: Call For Advice To Solve Your AV Needs

Free Lifetime Live Tech Support - 800-841-9238

Here are the steps to get the HDMI Over CAT5/6/7 Cable connected and IR to function.

Before installing the CAT5/6/7 cable in to a wall, connect the CAT cable between the Transmitter and
Receiver on the floor.

Connect one HDMI cable from the source to the transmitter

Connect one HDMI cable from your receiver to your TV

Plug in the power supplies to both the transmitter and receiver

Now that you have a picture you can install the CAT5/6/7 cable in the wall ceiling or wherever you are
wanting to run it

Installing and setting up your IR

On the transmitter side connect the IR cable that looks like the picture below to the IR OUT

Now find the IR emitter on your source device we like to take a flashlight and point it at the front panel of the
source like below.

IR setup for HDMI over CAT5

This document will work with either of the 2 products listed below:-

http://www.hdtvsupply.com/hdmi-over-1-cat5-cable.html

http://www.hdtvsupply.com/hdmi-over-cat5.html

Summary of Contents for HDTVHDVE100

Page 1: ...dreceiver 5 Now that you have a picture you can install the CAT5 6 7 cable in the wall ceiling or wherever you are wantingtorunit Installing and setting up your IR 1 OnthetransmittersideconnecttheIRca...

Page 2: ...oks like the picture below to the IR IN 5 Now connect the IR to your TV an example has been included 6 Now that you have all the cables connected and mounted you can control your source device from yo...