Port
Function
DC/5V
Supply power for the receiver
RESET
Hold down the key,the model will re-start
IR-RX
Connect IR receiver to this port
HDMI OUT
Connect HDTV to this port
UTP IN
Cat5e/6 cable in
SET
Multipoint to multipoint match setting
5.Connection and operation
1) Connect the HDMI source to the HDMI Transmitter with HDMI cable
2) Connect the HDMI receiver to the HDTV display with HDMI cable.
3) Use one Cat5e/6 cable up to 120m to connect the Sender and Receiver.
4) Connect the “IR receiver “into “IR-TX” port on transmitter, and “IR transmitter ” into the “IR-RX”
on receiver, and make sure the IR transmitter aim at IR receiver of the controlled device if you need
the IR control function.
5) Connect two pieces of 5V power supply to the transmitter and receiver, power supply for the
equipment and the LED indicator light on. When status lamp on and flicker, equipment starts
normal.
6) Multipoint to multipoint match setting: when multipoint to multipoint connecting and multiple
TX and multiple RX connect to the switch , the IP extender can match based on “SET” setting (eg:
“SET” of TX is 0001, “SET” of RX is 0001).
